|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 4130||Genuine Swiss Clone 4130 movement||Swiss 7750 Movement||Asian MingZhu Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Dial Color||Grey Dial|
Watch Case: 316L. The material in this case comes from 316L, which is one of the most heat-resistant stainless steel grades. Its corrosion resistance is very good, even at temperatures as high as 1100*F, without any further heat treatment.
Case Back: Solid. The case uses a thickened solid case back, which is more water-resistant than the through-bottom. A waterproof sealing ring is added to the through-bottom watch, which makes it difficult to seal.
Crystal: Sapphire Crystal. We use sapphire crystal for the watch, which is a very common glass that can protect your watch from scratches. Tips: The A Replica is applied with mineral glass instead of sapphire.
Hand: Silver-tone. About the hand design of the watch is silver-tone, which is the same color as your case color. It fits the watch well.
Second Markers: Minute Markers around the outer rim. The minute mark around the outer edge of the glass is a design element that represents time. As shown in the picture above, the minute mark around the outer edge.
Dial Markers: Diamonds. We can use watches with diamonds, because the markings instead of Roman numerals will affect the appearance of the dial.
Luminiscence: Hands. About the watch, the luminiscence is hands. As you can see in the pictures above.
Bezel Material: Stainless Steel. The watch uses a high-end stainless steel bezel, which is more simple and endurable. It makes you improve your temperament from the inside out.
Clasp: Deployment. Our watch uses a deployment clasp which makes it more convenient for you to wear the watch, and the appearance is more beautiful.
Water Resistance: 30 meters. The watch’s waterproof depth is 30 meters that is enough for no worries. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.